So you just got a new Fujifilm X100F? Congratulations on your new, great camera. You might think about, which accessories you could need? Well, maybe I can help you a bit. Here is my personal list of five essential accessories for the X100F that complements the camera ideally for my personal preference of shooting.
#1: Two Extra Batteries and Dual Charger
Being used to shoot with a DSLR I never thought too much about batteries, however the X100F is a mirrorless camera. Even though I typically disable the LCD screen and use the optical view finder instead of the electronic one I can easily drain one battery after half a day shooting on the street. Therefore I strongly recommend to get at least one extra battery to be able to shoot a day long and an additional third one as backup or for the evening, should the day become a bit longer.
But how do you charge 3 batteries in the evening? While you can charge one battery in the camera using the USB port and another using the original Fujifilm charger, there is still one battery left, that cannot be charged at the same time. Therefore I have bought a dual charger by Blumax. On Amazon.de you can get a set with two spare batteries. As you can see in the image I have bought another secondary battery (the red one) first, before I have bought the charger bundled with one extra Blumax battery after I had noticed that just one single spare battery could become troublesome.
Bonus point for the Blumax dual charger. The charger uses adapter plates to become compatible with a wide range of camera batteries. I have ordered adapter plates for my Canon LP-E6 batteries. When I travel I have to pack just the Blumax charger with the adapter plates to charge both types of batteries.
#2: Lens Hood and Lens Cap
The X100F has a fixed lens. Any scratches on this lens are scratches on the camera as you cannot simply exchange it. So you need some extra protection. The problem with the X100F: you cannot simply put a protection filter on it as you need an adapter ring for screwing a filter on it. Do not dare to simply mount an adapter in reverse on the lens' thread. While focusing the front element is moving!
Therefore the best protection in my opinion is to use a lens hood. I have opted for the JJC LH-JX100, which isn't too expensive, but still is a very solid option made of metal. The lens hood consists of an adapter for the hood that serves as filter adapter also. However there is one minor issue now. You do not want to screw of the adapter all the time when you want to put the Fujifilm lens cap on. But when you just remove the lens hood and leave the adapter screwed on the lens the original Fujifilm lens cap does no longer stick well and falls off easily.
Therefore I strongly recommend to buy a cheap standard 49mm lens cap, which you can simple put on the lens hood adapter even while the lenshood is attached. With this combination you can keep the solid lens hood on all the time, while the lens front element is protected from dust..
#3: Wrist Strap
I do not like neck straps. Period. Never liked them. When I am shooting on the street I carry a shoulder bag around my neck anyway. The camera strap would be just the second strap that always gets into the way of the bag strap. Plus I like to have the camera ready all the time, so I am holding it in my hand anyway. And when I need my hands for other things I just put the camera into the bag.
However holding just the bare camera gives me an insecure feeling. Therefore I have opted for a wrist strap. There are many, many options that all work equally well, so choose the one that you like most.
In the case of the classy looking X100F I wanted something that looks classy as well and have opted for a leather wrist strap by Opaion, which works very well for me.
Then I found the Megagear MG1329, which looks like a cheaper rip-off of the Ona Bond Street as it offers almost the identical measurements and features for less than half the price, plus more secure strap hooks.
And I must say I love this bag. It looks great. It is lightweight. And it fits just everything I need for a street photography day.
#5: Soft Release Button
Really? A red soft release button as an essential accessory? Yes, you are reading right.
I admit that at first I wanted to get this soft release button by JJC just because of its look. However this little button changes the shutter press feeling quite a lot. The shutter button on the X100F is pretty stiff. As I am used to a much softer shutter button on the Canon, this soft release button makes it much easier for me to perform the half-pressed and final shutter activation. It's hard to describe. I think you have to try this on your own.
I have my camera set to make no noise and as I am using the optical view finder, I have also disabled the picture preview. So I have no other feedback, when a picture was taken other than pressing the shutter. Without the soft release button I sometimes missed a shot as I accidentally thought that the half-press was already the final press.
When you buy a different soft release button make sure that it comes with a O ring that is placed between the shutter and the soft release button, which prevents the button from unscrewing itself and getting lost.
That's my list of essential accessories for the Fujifilm X100F. Do you own an X100 as well? Is there an accessory that you cannot live without? Please tell me in the comments below.